Sanyo VCC-HD2500 Manual page 19

The camera does not record.
1 No SD memory card has not been installed in the camera.
Install an SD memory card.
2 The SD memory card has not been formatted.
Format the SD memory card on the SD MEMORY CARD screen.
3
Time elapsed from turning on the camera is less than 5 minutes.
After turning on the camera, wait 5 minutes or more before starting to record.
4 The SD memory card is write-protected.
Release the write-protection switch on the SD memory card.
5
You may have removed the SD memory card without first stopping the data write.
Format the SD memory card. Furthermore, the SD memory card may be damaged if you remove it
while it is being accessed. Before removing an SD memory card, stop recording by proceeding as
follows.
<Method for stop recording>
Set [SD MEMORY CARD] to "NO USE" on the SD MEMORY CARD screen.
Or, press the NEAR button provided on the left-side face of the camera for 2 seconds or more.
I cannot play back.
The camera is not equipped with playback functions.
Install the supplied application software "HDC Downloader/ DLViewer" from the supplied CD-ROM.
This application software will allow you to download and play back video data.
Q&A 10/11