Sanyo VCC-HD2500 Manual page 36

In the stream list (
Initially, this list shows video settings for STREAM1 and STREAM2.
2
Configure the video/image conditions for the stream you want to register and click
The settings are saved. The stream list now includes the stream you just registered.
In [NAME], type the stream name you want.
1
You can type up to 64 alphanumeric characters.
2 In [CODEC], select the image/video compression format.
JPEG, H.264
3 In [RESOLUTION], select the display resolution.
The available options vary depending on your selections in [ASPECT RATIO] and [CODEC].
JPEG (16:9): 1920×1080, 1280×720, 1024×576, 640×360
JPEG (4:3): 2288×1712, 1600×1200, 1280×960, 1024×768, 800×600, 640×480, 320×240
H.264 (16:9): 1920×1080, 1280×720, 640×360, 320×180
H.264 (4:3): 1600×1200, 1280×960, 1024×768, 640×480, 320×240
In [DIGITAL PTZ], enable or disable the digital PTZ function.
4
To display areas of subject you clipped, or use the digital PTZ function on the live screen, select "ON".
You cannot select "ON" if you selected "H.264" in [CODEC].
Selecting "ON" in [DIGITAL PTZ] fixes the [RESOLUTION] value to a VGA-equivalent size ("640×
360" in 16:9 aspect ratio or "640×480" in 4:3 aspect ratio).
5 If you selected "H.264" in [CODEC], in [GOP], enter a GOP value.
This enables you to specify the GOP setting for the H.264 video stream.
In [FRAME RATE], select the frame rate of the stream.
6
The available options vary depending on your selection in [CODEC] and your camera model.
A
), the currently registered streams are shown.
Working with Administrator Configuration Screens 16/66
SET .