Sanyo VCC-HD2500 Manual page 88

1
Start Internet Explorer.
The supported Web browser is Internet Explorer Ver.6.0 SP2 or higher, or Internet Explorer Ver.7.0.
2
In the address bar, type the IP address of the camera and press [Enter] key.
When you access the camera, the login screen appears.
If this is the first access to the camera, in the Address bar, enter the default IP address as follows.
If you set [SSL] to "ON", before the IP address, type "https://" (instead of "http://").
Attempts to access the camera using the default IP address will fail if that address is already being
used by another device in the network.
If so, change the IP address of the existing device before accessing the camera.
3
Type your user name and password and click
The language selection screen appears.
If this is the first access to the camera, log in as an admin user (administrator) using the following
default authentication information.
User name: admin
Password: admin
4
Click the button corresponding to the language you want to use.
The live screen appears.
From the second login onwards, the live screen appears automatically by skipping the language selection screen.
OK .
Working with Live Screen 2/18