Sanyo VCC-HD2500 Manual page 137

Sanyo vcc-hd2500: user guide
Hide thumbs Also See for VCC-HD2500:
Table of Contents

Advertisement

Using one of these alarm input terminals as the Day/Night switching terminal, however, enables the camera
to be switched between the color and black-and-white video modes when an external control signal is
received.
Using network operation, under [DAY/NIGHT], set [DAY/NIGHT] to "COLOR" and select the terminal
you want to use in [EXT ALARM].
Then, in [POLARITY] under [ALARM SETTINGS], select the signal polarity of the alarm input
terminal.
Alarm output terminals (ALARM OUT1/2)
2
Connect a buzzer, lamp, or other alarm device to these terminals.
COM terminal (Earth grounding terminal)
3
Connect the camera to your monitor via the supplied video cable.
You can perform focus and iris adjustments while monitoring live video on the monitor.
For details, refer to the "Basic Connections" section.
Use this socket to connect an optional auto iris lens.
For details, refer to the "Lens Installation" section.
Use the buttons provided on the left-side face of the camera to perform the following operations.
These operations may be performed with the Web browser installed on your PC. For details, refer to the linked
information.
Introduction 7/18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vcc-hd2500p

Table of Contents