Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rottler Manuals
  4. Industrial Equipment
  5. F69A
  6. Maintenance and parts manual

Rottler F69A Maintenance And Parts Manual

Cnc machining center
Hide thumbs

Advertisement

Quick Links

Download this manual
8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230
Rev 062022

Advertisement

loading
Need help?

Need help?

Do you have a question about the F69A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rottler F69A

Summary of Contents for Rottler F69A

  • Page 1 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 2 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 3: Parts Ordering

    PARTS ORDERING For optional equipment catalogs, please visit https://www.rottlermfg.com/documentation.php For fastest service ordering parts or equipment, contact us via e-mail with the information below. For customers within the U.S., send emails to parts@rottlermfg.com, for customers outside of the U.S., use intlparts@rottlermfg.com Have the following information on hand to expedite the ordering process: 1.

  • Page 4: Manual Sections

    MANUAL SECTIONS INTRODUCTION MAINTENANCE TROUBLESHOOTING MACHINE PARTS MSDS 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 5 “Installation Report” located in the Installation Chapter of this manual. We suggest that the new user of the F69A read the CONTROL DEFINITIONS to get an idea how the machine operates. The Operating Instructions chapter should be read in order to familiarize the user with the actual button pushing sequences required to carry out a job.

  • Page 6: Limited Warranty

    Should a product not be as warranted, Rottler sole obligation shall be, at its option, to repair, correct or replace the product or to refund the amounts paid for the Product upon its return to a location designated by Rottler.
  • Page 7 Section 1: Introduction F69A Maintenance and Parts Manual injury or loss. Buyer waives any right, beyond the foregoing warranty, to make a claim against Rottler. No warranty is provided for any Products not paid in full. Merchandise cannot be returned to Rottler without prior approval. Customer must contact the Order Department or representative to get approval and to be issued a Return Goods Authorization number (RGR#).

  • Page 8: Table Of Contents

    Section 2: Maintenance F69A Maintenance and Parts Manual MAINTENANCE Contents Maintenance .........................6- Quick Reference Lubrication Chart: F69A ................. 6- Quick Reference Preventative Maintenance: F69A ............6- Lubrication ..........................6- Automatic Lubrication System ......................6-4 Power Draw Bar Lubrication: ......................6-5 Right Angle Drive Lubrication Information..................6- Probe “On-Center”...

  • Page 9: Quick Reference Lubrication Chart: F69A

    Section 2: Maintenance F69A Maintenance and Parts Manual Replacing the Motherboard Battery .................. 6- Digital Micrometer setting instructions ................6- To Set Or Edit Micrometer ......................6-27 Procedure: ............................6-30 Maintenance Quick Reference Lubrication Chart: F69A Refer to the maintenance section in the manual for lubrication location points and instruction.
  • Page 10 Section 2: Maintenance F69A Maintenance and Parts Manual Check Machine Geometry Check Incoming Voltage Removable copy Quick Reference Lubrication Chart: F69A Refer to the maintenance section in the manual for lubrication location points and instruction. Frequency Recommended Assembly (Hours) Lube Operation...

  • Page 11: Lubrication

    Section 2: Maintenance F69A Maintenance and Parts Manual Check Machine Geometry Check Incoming Voltage Lubrication Automatic Lubrication System The automatic lubrication system includes metering valves for proportional distribution and includes an alarm for low fluid level warning. Still, please check fluid level before operation. Add Union 76 Way Oil HD-68, or equivalent, as needed in reservoir at rear of machine.

  • Page 12: Right Angle Drive Lubrication Information

    With the drive mounted on the machine spindle the oil level should be even with the bottom of the pipe plug threads. All Rottler Right Angle Drives are filled with Union 76 Turbine Oil 68 prior to shipment. Use this or an equivalent ISO VG68 oil if the need to add or change oil arises.

  • Page 13: Probe "On-Center" Adjustment

    Verify that the four adjusting screws and two locking screws are installed in the probe tool holder. • Assemble probe on either CAT 40 Shank or Rottler Taper • With the machine breaker that supplies power to the probe receiver turned off;...
  • Page 14 Section 2: Maintenance F69A Maintenance and Parts Manual you will see the right light turn red, yellow, red, yellow, red, yellow is shows the partnership has been acquired. • Go into the software and do a probe auto center and hit start probe to verify that it works correctly.
  • Page 15 Section 2: Maintenance F69A Maintenance and Parts Manual If the Probe does not turn off after 137 seconds you will need to make sure that the RMI-Q switches are shown in the following positions: 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230...
  • Page 16 Section 2: Maintenance F69A Maintenance and Parts Manual During normal use, the difference between the touch position and the reported position does not change, but it is important that the probe is calibrated in the following circumstances: • when a probe system is to be used for the first time;...

  • Page 17: Leveling And Alignment

    Section 2: Maintenance 2-10 F69A Maintenance and Parts Manual • Dial the probe stylus into center using a .0001” indicator to within .0005” the tighter tolerance you hold the more accurate the machine will be. You must use an indicator that takes very little pressure to get a reading.

  • Page 18: Leveling The Machine

    2-11 F69A Maintenance and Parts Manual The following is a description of how to properly level and align the F69A machine. These procedures should be followed in the order they written to obtain correct machine level and alignment. Leveling the Machine: After uncrating the F69A set it down in desired location with leveling bolts and leveling pads installed.
  • Page 19 Section 2: Maintenance 2-12 F69A Maintenance and Parts Manual Note: The position (angle) of the probe to the surface you are indicating is critical. Using an incorrect angle on the probe will result in inaccurate readings from the surface being indicated.
  • Page 20 Section 2: Maintenance 2-13 F69A Maintenance and Parts Manual Put about .010” pressure on the indicator. Run the vertical throughout its full travel. The runout should not be more than .0005. If the runout is more than this, check the table top as well as the bottom of the alignment cylinder for burrs or debris.

  • Page 21: Middle Leveling Bolts

    Section 2: Maintenance 2-14 F69A Maintenance and Parts Manual If the Vertical perpendicularity is not within tolerance the Middle Leveling Bolts may need to be adjusted. Middle Leveling Bolts If the procedures for the Leveling was followed correctly, it is unlikely that the deviance from Front to Back is being caused by the Middle Leveling Bolts.
  • Page 22 Section 2: Maintenance 2-15 F69A Maintenance and Parts Manual Example 1: Zero the indicator on the top of the cylinder. When traveling to the bottom of the cylinder, if the reading decreases past -.001” to something such as -.002”, then the middle leveling bolts have too little pressure on them and it is bowing the casting slightly in the middle as shown below.

  • Page 23: Sweeping The Spindle

    Section 2: Maintenance 2-16 F69A Maintenance and Parts Manual The arched line underneath the picture is illustrating the bow to the casting if the middle leveling bolts have too much pressure on them. To correct the deviance slowly remove pressure from the middle bolts equally. Be sure to watch the level of the machine to be sure not to throw it off.
  • Page 24 Section 2: Maintenance 2-17 F69A Maintenance and Parts Manual Loosen the four Spindle Main Bolts slightly. Using the Adjustment bolt on the right hand side of the spindle head, sweep the spindle to within +/- .0002 Left to Right. Do not worry about the Front to Back reading at this time as the Spindle Main bolts are not tight Once the Left to Right has been aligned, tighten the Spindle Main Bolts to 80-ft.
  • Page 25 Section 2: Maintenance 2-18 F69A Maintenance and Parts Manual Check the Front to Back sweep it should be within .0005. If it is not, the Vertical gibs may need adjustment. 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230...

  • Page 26: Vertical Gib Adjustment

    Section 2: Maintenance 2-19 F69A Maintenance and Parts Manual Vertical Gib Adjustment Gib adjustments can affect the sweep of the spindle front to back. With the indicator in the 6 O’clock position (as you face the front of the machine) tightening the vertical gibs will lessen the pressure on the indicator probe.

  • Page 27: Performance Fixture Line-Up

    The gibs may need further adjustment at this point. This is only recommended as a starting point. If there are any questions on this procedure contact Rottler Manufacturing Service Department. Performance Fixture Line-Up: Install the keys for the Head and Tail Stock into the machine bed as shown below.

  • Page 28: Performance Fixture Line-Up (Cam End Tunnel Boring)

    Section 2: Maintenance 2-21 F69A Maintenance and Parts Manual Install the Main Bar though the tail stock and into the head stock. Run the indicator along the back side of the bar. It should be within .002” through out the travel. Adjust the tail stock in or out as needed to align the bar.

  • Page 29: To Copy Block Info From Your Machine

    On the machine that has the info to be copied from, with the Rottler program up, go to file, click open, with the new window open scroll to local disk C:, open rottler, open backup 3 axis (if you have an F90 or...
  • Page 30 Section 2: Maintenance 2-23 F69A Maintenance and Parts Manual The following is the procedure for replacing the motherboard battery. Turn off the power on the electrical enclosure and remove the enclosure cover. Locate the computer and check to see that the power light is not on. If it is on turn off the power switch.
  • Page 31 Section 2: Maintenance 2-24 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 32 Section 2: Maintenance 2-25 F69A Maintenance and Parts Manual Locate the battery on the motherboard. will pop up. Push the battery retention clip away from the battery. When the clip is released the battery Remove the battery and place new battery in the battery holder.
  • Page 33 Section 2: Maintenance 2-26 F69A Maintenance and Parts Manual Digital Micrometer setting instructions Turn the thimble until the ‘0’ line on the thimble lines up with the vertical line nearest the spindle lock ring. Determine which cutter head bore range the micrometer is going to be used on. ( example; 2.9 – 6.0 ) We want to initially set the micrometer to the minimum bore diameter of this cutterhead.
  • Page 34 Section 2: Maintenance 2-27 F69A Maintenance and Parts Manual Press and hold the set/on button and the + or – button at the same time. “Set” will flash in the display. This places the micrometer in edit mode. (CAUTION: use a pencil tip or something similar to gently push the small round buttons - they are quite small and a bit delicate.)
  • Page 35 Section 2: Maintenance 2-28 F69A Maintenance and Parts Manual Place the tool holder used to bore the hole into the micrometer frame. Slide the location nub on the back of the tool holder gently up against the end of the digital micrometer shaft.
  • Page 36 Section 2: Maintenance 2-29 F69A Maintenance and Parts Manual Back the digital micrometer shaft off, then bring it up to touch the tool holder and recheck that the numbers in the display are the same as the numbers previously shown.
  • Page 37 Section 2: Maintenance 2-30 F69A Maintenance and Parts Manual Procedure: The short vertical lines that cross the horizontal scale on the micrometer sleeve are reference marks. Set the zero on the micrometer thimble even with the first vertical line and note the size shown in the digital display.
  • Page 38 Section 2: Maintenance 2-31 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 39: Troubleshooting

    Rottler Factory Service at service@rottlermfg.com for assistance and your service request. You may also call Rottler at 1-800-452-0534 or 1-253-872-7050 Please ensure you have the Machine Model and Serial Number available when contacting Rottler for Service 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230...
  • Page 40 Section 3: Troubleshooting F69A Maintenance and Parts Manual Section 7 Troubleshooting 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 41 Section 4: Machine Parts F69A Maintenance and Parts Manual MACHINE PARTS Contents Rottler Replacement and Specialty Inserts...............8-1 GENERAL INFORMATION ...................8- Tool Nose Radius ......................... 8- Edge Preparation ........................8- Surfacing Inserts Cutting Speed Calculation ..............8- CYLINDER BORING INSERTS ..................8- RT321 (General purpose and sleeving) ................
  • Page 42 Section 4: Machine Parts F69A Maintenance and Parts Manual RT212F (Precision Counterboring and Finishing) ............. 8- RS322 (High speed oversize through boring) ..............8- 6301E (High speed oversize through boring) ..............8- 501-29-6K (High speed aluminum boring) ................8- 511-29-20E (Steel boring) ..................... 8- SURFACING INSERTS ....................8-...
  • Page 43 MAIN LINE BORING INSERTS ..................8- CONNECTING ROD INSERTS ...................8- Machine Parts ......................8- F69A Front View ........................8- F69A left Side View ......................8- F69A Right Side View ......................8- F69A Top View ........................8- Motor Locations ........................8- Electrical Panel ........................8- Axis Amps &...
  • Page 44 Section 4: Machine Parts F69A Maintenance and Parts Manual Computer Enclosure 650-1-27X .....................8-22 Computer Parts ..........................8-23 Enclosure Door Components ......................8-24 Control Panel ...........................8- Upper Belt Housing ......................8- Chip Shield Assembly ......................8- Pendent Swing Arm Assembly ..................8- Base ............................. 8- Base Parts List ..........................8-30...

  • Page 45: Rottler Replacement And Specialty Inserts

    GENERAL INFORMATION Rottler CBN and PCD Inserts are laser marked with our part number on one side. On single sided inserts, the part number is on the back side of the insert.

  • Page 46: Surfacing Inserts Cutting Speed Calculation

    DIAMETER in Inches The feed rate on most Rottler machines is designated in inches / revolution. The F65M and the SFM have feed rates designated in inches / minute. It is important to adjust the inches / minute rate to obtain the correct load (inches / revolution).

  • Page 47: Rt322 (General Purpose And Sleeving)

    Section 4: Machine Parts F69A Maintenance and Parts Manual mm/rev) should be used. When cutting gray cast iron use a speed in the 800 – 1200 SFPM area for best productivity and tool life. When cutting nodular, ductile, or compacted graphite cast iron the speed should be in the 200 – 400 SFPM area –...

  • Page 48: Rt211 (General Purpose And Sleeving)

    Section 4: Machine Parts F69A Maintenance and Parts Manual RT211 (General purpose and sleeving) A 1/4” (6.35 mm) IC triangular insert with a black ceramic coating and 1/64” (.4 mm) cutting radius. The 1/64” (.4 mm) radius should be used when machining to a step where the mating part requires a smaller radius to eliminate an interference problem.

  • Page 49: Rt211F (Precision Counterboring And Finishing)

    RS322 (High speed oversize through boring) A 3/8” (9.52 mm) IC, square insert with a black ceramic coating. It is used on Rottler boring machines for through boring when removing .010” - .060” (.25 mm - 1.5 mm) on the diameter.

  • Page 50: 501-29-6K (High Speed Aluminum Boring)

    “string” of metal that can often form when boring steel. SURFACING INSERTS Rottler offers a wide variety of inserts used for surfacing. There are many applications in surfacing that include a variety of materials to be surfaced. Cylinder heads with pre-combustion chambers are particularly challenging because there are such a variety of materials used by the different cylinder head manufactures.

  • Page 51: 6303K

    RPM speeds with a 14” (355.6 mm) cutter range from 1000-2000 RPM. Requires the purchase of 1/2” (12.7 mm) negative rake tool holders. The standard Rottler 3/8” (9.52 mm) IC tool holders will not hold this insert.

  • Page 52: 6303Q

    This is the best insert for roughing and finishing spray weld. This is used in Rottler milling heads that are designed specifically for cutting spray weld. Currently they cannot be used in Rottler’s common “flycutter” style surfacing cutterheads.

  • Page 53: 6303U

    Section 4: Machine Parts 4-13 F69A Maintenance and Parts Manual 6303U A round 3/8” (9.52 mm) IC, single sided, CBN Insert. This insert does an excellent job when cutting hard cast iron blocks and heads of a single material or bi-metal. This insert is the best to use when machining compacted graphite cast iron heads and blocks often found in the performance industry.

  • Page 54: Inserts For Shell Milling Cutterheads

    1/64” (.8 mm) inserts. CONNECTING ROD INSERTS Many customers have reported good results boring connecting rods with Rottler RT inserts. When boring small end bearings made of bronze, the RTF series of inserts should be used. 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230...

  • Page 55: Machine Parts

    Section 4: Machine Parts 4-15 F69A Maintenance and Parts Manual Machine Parts F69A Front View 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 56: F69A Left Side View

    Section 4: Machine Parts 4-16 F69A Maintenance and Parts Manual F69A left Side View 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 57: F69A Right Side View

    Section 4: Machine Parts 4-17 F69A Maintenance and Parts Manual F69A Right Side View 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 58: F69A Top View

    Section 4: Machine Parts 4-18 F69A Maintenance and Parts Manual F69A Top View 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 59: Motor Locations

    Section 4: Machine Parts 4-19 F69A Maintenance and Parts Manual Motor Locations 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 60: Electrical Panel

    Section 4: Machine Parts 4-20 F69A Maintenance and Parts Manual Electrical Panel Axis Amps & Input Board 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 61: Output & Sm Power Boards

    Section 4: Machine Parts 4-21 F69A Maintenance and Parts Manual Output & SM Power Boards 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 62: Computer Assembly

    Section 4: Machine Parts 4-22 F69A Maintenance and Parts Manual Computer Assembly 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 63: Enclosure Side Components

    Section 4: Machine Parts 4-23 F69A Maintenance and Parts Manual Enclosure Side Components 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 64: Din Rail Components

    Section 4: Machine Parts 4-24 F69A Maintenance and Parts Manual DIN Rail Components 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 65: Computer Enclosure 650-1-27X

    Section 4: Machine Parts 4-25 F69A Maintenance and Parts Manual Computer Enclosure 650-1-27X 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 66: Computer Parts

    Section 4: Machine Parts 4-26 F69A Maintenance and Parts Manual Computer Parts 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 67: Enclosure Door Components

    Section 4: Machine Parts 4-27 F69A Maintenance and Parts Manual Enclosure Door Components 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 68 Section 4: Machine Parts 4-28 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 69: Control Panel

    Section 4: Machine Parts 4-29 F69A Maintenance and Parts Manual Control Panel 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 70: Upper Belt Housing

    Section 4: Machine Parts 4-30 F69A Maintenance and Parts Manual Upper Belt Housing 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 71: Chip Shield Assembly

    Section 4: Machine Parts 4-31 F69A Maintenance and Parts Manual Chip Shield Assembly 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 72: Pendent Swing Arm Assembly

    Section 4: Machine Parts 4-32 F69A Maintenance and Parts Manual Pendent Swing Arm Assembly 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 73: Base

    Section 4: Machine Parts 4-33 F69A Maintenance and Parts Manual Base Base Parts List 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 74 Section 4: Machine Parts 4-34 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 75: Column

    Section 4: Machine Parts 4-35 F69A Maintenance and Parts Manual Column 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 76: Column Parts List

    Section 4: Machine Parts 4-36 F69A Maintenance and Parts Manual Column Parts List 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 77: Headstock

    Section 4: Machine Parts 4-37 F69A Maintenance and Parts Manual Headstock Headstock Parts List 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 78 Section 4: Machine Parts 4-38 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 79: Table

    Section 4: Machine Parts 4-39 F69A Maintenance and Parts Manual Table Table Parts List 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...

  • Page 80: Wiring Diagram

    Section 4: Machine Parts 4-40 F69A Maintenance and Parts Manual Wiring Diagram Scalable PDF version of this diagram located on the manual CD that shipped with this machine. 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230...

  • Page 81: Connector Pin Out Diagram

    Section 4: Machine Parts 4-41 F69A Maintenance and Parts Manual Connector Pin Out Diagram Scalable PDF version of this diagram located on manual CD that shipped with the machine. 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230...
  • Page 82 Section 4: Machine Parts 4-42 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 83 Section 4: Machine Parts 4-43 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 84 A complete list of the Material Data Safety Sheets of substances and materials used by Rottler Manufacturing during manufacturing, testing, and shipping is located on the Manual CD shipped with the machine. Material Data Safety Sheets are also located on the company web site: http://www.rottlermfg.com/documentation.php...
  • Page 85 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 86 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 87 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 88 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 89 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 90 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 91 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 92 Section 5: SDS F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 93 Section 5: SDS 5-10 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 94 Section 5: SDS 5-11 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 95 Section 5: SDS 5-12 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 96 Section 5: SDS 5-13 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 97 Section 5: SDS 5-14 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 98 Section 5: SDS 5-15 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 99 Section 5: SDS 5-16 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 100 Section 5: SDS 5-17 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 101 Section 5: SDS 5-18 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 102 Section 5: SDS 5-19 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 103 Section 5: SDS 5-20 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 104 Section 5: SDS 5-21 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 105 Section 5: SDS 5-22 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 106 Section 5: SDS 5-23 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 107 Section 5: SDS 5-24 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 108 Section 5: SDS 5-25 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...
  • Page 109 Section 5: SDS 5-26 F69A Maintenance and Parts Manual 8029 S 200th Street, Kent, WA 98032 USA | www.rottlermfg.com | Ph: (253) 872-7050 | Fax: (253) 393-0230 Rev 062022...