Interface Settings - Simpleway nnounce micnode2 Hardware User's Manual

micnode2 – Hardware User Guide
5. Enter credentials into the
IMPORTANT: Default credentials admin/simpleway, default PIN code is 23646
Now you are able to access the configuration settings of the device and continue with interface configuration.

Interface Settings

After login into the nnounce configuration UI, establish a connection between your new micnode2 station and your
network. Configure the LAN A and LAN B ports in the Interfaces section.
Choose between manual and auto mode setting:
•
Manual - user enters IP Address, Net Mask and default Gateway.
•
Auto - DHCP server needs to be available to obtain network settings automatically.
•
Off mode turns the port off.
IMPORTANT: You will need the device's IP address, MAC address from your device which you find on the rear panel.
NOTE: Navigate backwards or cancel your steps with the Back function in your browser.
TM
nnounce by Simpleway
nnounce configuration user interface:
7