Stream Configuration - Simpleway nnounce micnode2 Hardware User's Manual

micnode2 – Hardware User Guide
7. Upon successful connection status field should be OK.

Stream Configuration

Create an AES67 stream in the Q-SYS designer. Select first the component and then configure it in the micnode2 plugin.
1. Add the stream component to your Q-SYS design:
2. Set up stream properties:
IMPORTANT: Streams need to have Script access set to the value Script. In older Q-SYS designer versions Script access is
not visible in Stream properties. Rename the stream in a disconnected design. Only after that the stream is visible in the
micnode2 plugin.
TM
nnounce by Simpleway
13