micnode2 – Hardware User Guide
Conventions used in this manual:
•
WARNING: Information marked 'Warning' alerts the user to potential situations that could cause personal injury or
death.
•
CAUTION: Alerts the user to possible damage to equipment or property. By not following the instructions, the
damage caused to the equipment may not be covered under warranty.
•
IMPORTANT: Indicates instructions or information that are vital to the successful completion of the procedure.
•
NOTE: Is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-
insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important
safety, and operating and maintenance instructions in this manual.
1. To prevent the risk of electric shock, only qualified personnel should remove the cover.
2. Before servicing, disconnect the power supply.
3. Don't expose the device or its equipment to water, rain, or any other liquids or liquid cleaners, as it
may cause fire or electric shock.
4. Use only one power supply to the microphone station at a time.
•
Operating temperature of the device - range 32°F – 122°F (0°C–50°C), storage temperature - range 14°F
to 140°F (-10°C–60°C).
•
Power should only be supplied over Ethernet (PoE) IEEE 802.3af.
•
Relative humidity range during storage: 10% to 85% humidity (non-condensing).
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with a dry cloth.
•
Do not block any ventilation opening. Install in accordance with the manufacturer's instructions and all federal, state, and
local municipal codes.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
•
If your unit uses an auxiliary power supply, do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
TM
nnounce
by Simpleway
WA R N I N G
IMPORTANT SAFETY INSTRUCTIONS
2
Need help?
Do you have a question about the nnounce micnode2 and is the answer not in the manual?
Questions and answers