Advertisement
micnode2 – Hardware User Guide
4. Save to core & Run your design and then open the micnode2 plugin.
5. Configure zone buttons in the plugin window in the Buttons configuration part.
Zones are now ready to use in micnode2 microphone station.
Announcement Triggering
Once the network settings and configuration including zones are set in Q-SYS designer, Live paging can be triggered with
the PTT button.
IMPORTANT: Which mode is used depends on Paging configuration of your micnode2 device in Q-SYS designer.
TM
nnounce
by Simpleway
17
Advertisement
Need help?
Do you have a question about the nnounce micnode2 and is the answer not in the manual?
Questions and answers