Port Configuration; Common Page; Job Template Attributes " Page - Ricoh AC205 User Manual

Port Configuration

You can invoke Configure Multi Direct Print Type S IPP port dialog from Printer Properties.
Multi Direct Print Type S IPP port configuration dialog has three pages:
Main
Job Template Attributes
Printer Groups

Common page

In this page you can specify:
Port Name (it should be done when you create the port, and it can not be changed
subsequently)
The printer or group of printers you want to print on.
Port Name should be unique among all ports.
You have two alternative ways to specify printer (or printers) location:
To associate the port with a single printer, you should select [Single Printer] option and
type the printer 's URL in [URL] edit box. If authentication is obligatory, you should check
[Printer requires authentication] checkbox and enter username and password in
corresponding edit boxes.
In case of multi-remote printing (when all you documents are printed on several printers
simultaneously) you should select [Multi-remote Printing] option and point out printers
groups. Printers groups are managed in [Groups] page.

"Job Template Attributes " page

In this page you can specify job attributes, they will be applied to any job printed with this port.
These attributes describe job processing behavior.
Priority
Resolution
Administrator Guide
Property
This attribute specifies a priority for scheduling the
job. A higher value specifies a higher priority.
This attribute identifies the resolution that printer uses
for the document.
Description
Page 2-13