Enabling Or Disabling Tcp/Ip - Ricoh AC205 User Manual

Enabling or Disabling TCP/IP

At the Type 103, perform these steps:
1
2
3
4
Page 1-4
Press [Menu] until you see
Network Setup on the top line of
the display.
Press or until Configure
Network is displayed and press
[Enter].
Press or until TCP/IP is
displayed and press [Enter].
Press or until Setup is
displayed and press [Enter].
To enable TCP/IP, press
until Enable is displayed and
press [Enter]. Otherwise display
Disable and press [Enter].
8. Network Setup
[Reset Network]
8. Network Setup
[Config Network]
Config Network
or
[TCP/IP]
TCP/IP
[Setup]
Administrator Guide