Ethernet
Use these instructions to set the speed rate for Ethernet using Web Image Monitor Type 103:
To complete the installation of the Type 103, perform these steps:
Enable Web Image Monitor Type 103 (see "Enabling Internet Services" on page 3-5).
1
At the Web Image Monitor Type 103 Home Page for the Type 103, select the [Network
2
Settings] tab.
In the Network Settings, select [General].
3
Choose the appropriate [Speed Rate].
4
Click the [Apply] button to implement any changes.
5
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Administrator Guide
Page 3-7