Manually setting TCP/IP Addresses
At the Type 103, perform these steps:
HINT:
refer to the Internet Services chapter for instructions.
When manually making the TCP/IP settings, you will need to know the following information:
The IP address.
The subnet mask, if required.
The Gateway address, if required
1
2
3 3
Administrator Guide
Web Image Monitor Type 103 can also be used to configure the Type 103,
Press [Menu] until you see
Network Setup on the top line of
the display.
Press
or
until Configure
Network is displayed and press
[Enter].
Press
or
until TCP/IP is
displayed and press [Enter].
8. Network Setup
[Reset Network]
8. Network Setup
[Config Network]
Config Network
[TCP/IP]
Page 1-7