Table of Contents
Advertisement
Windows 98/Me
Refer to "Installing Software for Network Printing" on page 2.34 of User's Guide to install
1
and setup the printer drivers on the workstation. Once the drivers are installed, connect a
driver to the printer on the network by selecting [ Multi Direct Print Type S] for the network
port.
Continue with Test Print on page 2-16.
2
Page 2-10
1.
Select [Start], select [Settings], and then select [Printers].
Right-click on the installed Printer icon and select [Properties].
2.
Select [Details] tab, and Click [Add Port].
The [Add Port] screen will be displayed.
3.
Select [Other] Radio button.
Select [Multi Direct Print Type S], and then click [OK].
4.
Search a printer using the following radio button options and click [Next].
- IP Address
- IPX/SPX Address
- DNS Name
- Auto detection on the network
5.
If you select "Auto detection on the network" in the step 4, printers on the network
are listed up. Select a printer in the list and click [Next]. Other options in the step 4
skip this step.
6.
Insert port name and click [Finish].
Administrator Guide
Advertisement
Chapters
Table of Contents
