Network Communication Setup; Automatically Setting Tcp/Ip Addresses - Ricoh AC205 User Manual

Network Communication Setup

Automatically setting TCP/IP Addresses

At the Type 103, perform these steps:
1
2
3
4
After a short period of time, the network will allocate the required addresses.
Print a System Data sheet to check the addresses (see Printing a System Data1-6).
5
Administrator Guide
Press [Menu] until you see
Network Setup on the top line of
the display.
Press or until Configure
Network is displayed and press
[Enter].
Press or until TCP/IP is
displayed and press [Enter].
You can use DHCP or BOOTP
to automatically configure TCP/
IP on the machine.
Press or until the
required setting method is
displayed and press [Enter].
8. Network Setup
[Reset Network]
8. Network Setup
[Config Network]
Config Network
[TCP/IP]
TCP/IP
[DHCP]
Page 1-5