Dean BK1814 Service & Parts Manual page 31

HIGH EFFICIENCY DECATHLON SERIES GAS FRYERS
1.7.7 Replacing the Frypot
23. Remove the temperature probe from frypot. (See Section 1.7.2, Replacing the Temperature
Probe: Controller–equipped Fryers, for specific instructions.)
24. Remove the high-limit from the frypot (see Section 1.7.3, Replacing the High-limit Thermostat).
25. Remove bolts from brackets securing burner
manifold to frypot. Leave the manifold in
place.
26. Using a sharp knife or box-cutter, cut the
silicon seal around the frypot. Use care not
to scratch stainless steel surfaces.
CHAPTER 1: SERVICE PROCEDURES
(cont.)
1-26
Removing bolts (arrows) from burner manifold
support brackets (both sides). Leave the burner
manifold in place after removing bolts.
Cutting frypot seal prior to frypot removal.