Sw Mode Screen - Panasonic AG-HPX370 Operating Instructions Manual

Item
PC MODE SELECT Sets camera operating mode when PC MODE is set to
ON and an external device is connected via USB.
USB HOST: Selects USB 2.0 for connecting an
external hard disk drive. (For details, refer to
page 150.)
USB DEVICE: Makes it possible to connect the
camera to a computer via USB 2.0 to enable use
of a P2 card as mass storage. (For details, refer to
page 149.)
PC MODE Operates the camera according to mode selected
using PC MODE SELECT.
ON: Operates in PC MODE.
OFF: Terminates PC MODE and returns the camera to
normal operation.
• This function is always set to OFF when the power is
turned on.

SW MODE screen

Item
LOW GAIN Sets the gain value assigned to the L position of the
GAIN switch.
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB
MID GAIN Sets the gain value assigned to the M position of the
GAIN switch.
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB
HIGH GAIN Sets the gain value assigned to the H position of the
GAIN switch.
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB
ATW Allows you to assign the ATW (Auto Tracking White
Balance) function to the WHITE BAL switch. (For
details, refer to page 56.)
Bch: Controls the ATW function when the WHITE BAL
switch is set to B position.
OFF: Does not assign the ATW function to the WHITE
BAL switch.
ATW TYPE Selects type of ATW (Auto Tracking White Balance)
function operation.
1: Standard ATW operation
2: Further restricts the color of the light source range
that is tracked than setting 1.
ATW operation reduces the risk of miscalculating light
sources.
W.BAL.PRESET Sets the color temperature assigned to the PRST
position of the WHITE BAL switch.
3.2K, 5.6K
Setting
Setting
Notes
• Not available when PC MODE is set
to ON.
• Not available when compiling to a clip
in one-clip recording mode.
Notes
• A USER button to which ATW has
been assigned cannot be used to turn
ATW off when the WHITE BAL switch is
set to B position and this menu is set
to Bch.
____ indicates the factory setting
17