Table of Contents
Advertisement
Setup menu list (continued)
SW MODE screen
Item
MID GAIN
(Camera)
HIGH GAIN
(Camera)
ATW
(Camera)
HANDLE
(Camera)
ZOOM
IRIS DIAL
(Camera)
USER1
(Camera)
(PB)
90
Display
mode
Sets the gain value assigned to the M position of the GAIN switch.
0dB, 3dB, 6dB, 9dB, 12dB
Sets the gain value assigned to the H position of the GAIN switch.
0dB, 3dB, 6dB, 9dB, 12dB
Sets the operation of the ATW (Auto Tracking White) function assigned to the
WHITE BAL switch. When the ATW function is allocated to the AUTO/MANUAL
switch or USER button, the operation remains effective.
Ach:
Activates the ATW function when the WHITE BAL switch is set to A.
Bch:
Activates the ATW function when the WHITE BAL switch is set to B.
PRST:
Activates the ATW function when the WHITE BAL switch is set to PRST.
OFF:
Deactivates the ATW function.
Sets the zoom speed assigned to each setting position of the HANDLE ZOOM
switch.
L/OFF/H: Sets LOW (low speed)/OFF/HIGH (high speed) to the 1//3 position.
(Zoom is disabled when set to OFF.)
L/M/H: Sets LOW (low speed)/MID (medium speed)/HIGH (high speed) to the
1//3 position.
L/OFF/M: Sets LOW (low speed)/OFF/MID (medium speed) to the 1//3 position.
(Zoom is disabled when set to OFF.)
Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL
IRIS mode)
DOWN OPEN: The iris opens when the IRIS dial is turned downward.
UP OPEN:
Selects the function assigned to the USER1 button.
SPOTLIGHT: Switches auto iris control for the spotlight on or off.
BACKLIGHT: Auto iris control for the backlight compensation. (Page 5)
BLACKFADE: Blackfade (Page 5)
WHITEFADE: Whitefade (Page 5)
ATW:
ATW LOCK: Fixes the white balance value when the button is pressed during
GAIN:18dB:
Press the button to set the gain value to 1 dB. This setting takes effect with the
50i and 50P recording formats only ∗
(1/1 ∗
) is established.
2
∗
60i and 60P recording formats only when SYSTEM FREQ is set to 59.9 Hz
1
∗
1/15 when SYSTEM FREQ is set to 59.9 Hz
2
•
When the gain value is switched to 1 dB or switched from 1 dB to another
value, the image can be disordered for a moment.
•
If the unit is being used in the MANUAL mode or AUTO mode, set the AGC item
on the AUTO SW screen of the setting menu to OFF to use this function.
D.ZOOM:
INDEX:
SHOT MARK: Shot mark recording (Page 7)
LAST CLIP: Deletes the last recorded clip. (Page 7)
•
After recording, clips cannot be deleted by switching to PB or PC mode, by
changing the recording format, or by turning the camera off.
Description of settings
The iris opens when the IRIS dial is turned upward.
Switches the ATW function on or off.
ATW. Press again to perform ATW.
. It is not valid when the slow shutter mode
1
Changes the ratio of the DIGITAL ZOOM function.
Each press of the button changes the ratio in the following order:
OFF (x1) → x2 → x5 → x10 → OFF (x1). (Page 36)
Index recording (Page 7)
indicates the factory setting.
Advertisement
Table of Contents
