Dc Out Connector And External Rec Start/Stop Switch Connection - Panasonic AG-HPX370 Operating Instructions Manual

DC OUT Connector and External REC Start/Stop Switch Connection

The DC OUT connector on the camera can output a 1.5 A
current.
Connecting an external switch to this connector enables
REC Start and Stop control.
An LED can be connected and used as a tally lamp, which
is convenient when the camera is mounted on a crane
during recording.
(Connection example)
4 1
3 2
LED
Resist-
ance
Start/Stop
1: GND
2: TALLY OUT
The AG-HPX370P/AG-HPX371E has open collector
output
TALLY ON:
Low impedance
TALLY OFF:
High impedance
3: REC Start/Stop switch
This pin is connected in parallel with the REC button
and the lens VTR button.
4: +12 V
 NOTE
Be sure to check polarity before connecting an external device
as incorrect connection could lead to damage.
108
DCOUTconnector
Cableconnector
HR10A-7P-4P(7)
HiroseElectricCo.
(For details on connecting
the connector, refer to
page 174.)
REC