Changing Scene File Settings - Panasonic AG-HPX370 Operating Instructions Manual

Changing scene file settings

 Example1: Change the name of the scene
file.
1
 Turnthescenefiledial,thenselectthescene
filetobechanged.
2
 SelectthemenuoptionNAMEEDITinthe
SCENEFILEscreen,thenpresstheJOGdial
button.
For details on menu operation, refer to [Using the
menus] (page 129).
SCENE FILE F3:SPARK
MATRIX
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
PUSH MENU TO RETURN
3
 SelectCHANGEandpresstheJOGdialbutton.
SCENE FILE F3:SPARK
MATRIX
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
PUSH MENU TO RETURN
9
NORM1
OFF
THIN
RETURN
CHANGE
NORM1
OFF
THIN
RETURN
CHANGE
4
 Whenthescreenshownbelowappears,use
theJOGdialbuttontoentera6-characterfile
name.
• Turning the JOG dial button changes the character
display in the following order: space () 
alphabet (A to Z)  numerics (0 to 9) 
symbols (; : < = > ? @ [ \ ] ^_-./).
• If the RESET button is pressed when the filename
has been set, the characters are cleared.
NAME EDIT
SW POSITION F3
S P A R K
PUSH MENU TO RETURN
• After you finish setting the filename, press the
MENU button. This completes the NAME EDIT
change. A change that has been confirmed is
retained after a power down and is not affected by
dial position. Items set for the scene file are also
retained.
 Example2: Save the F1 scene file to the
camera.
1
 SelectthemenuoptionLOAD/SAVE/INTinthe
SCENEFILEscreen,thenpresstheJOGdial
button.
For details on menu operation, refer to [Using the
menus] (page 129).
SCENE FILE
LOAD SAVE INIT
VFR
FRAME RATE
(SYNCHRO SCAN)
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
CHROMA LEVEL
PUSH MENU TO RETURN
RETURN
LOAD
SAVE
INITIAL
0
0
0
0