Sw Mode Screen - Panasonic AG-HPX500 Menu Information

Broadcast cameras
Hide thumbs Also See for AG-HPX500:
Table of Contents

Advertisement

SW MODE screen

Item
Sets the gain value assigned to the M position of the GAIN switch.
MID GAIN
●0 dB, 3 dB, 6 dB, 9 dB, 12 dB
Sets the gain value assigned to the H position of the GAIN switch.
HIGH GAIN
●0 dB, 3 dB, 6 dB, 9 dB, 12 dB
Sets the color temperature assigned to the PRST position of the WHITE BAL switch.
W.BAL.PRESET
●3.2 K / 5.6 K
Selects the function assigned to the USER MAIN button.
●REC CHECK: Performs Rec Check.
●SPOTLIGHT: Auto iris control for the spotlight ON/OFF
●BACKLIGHT: Auto iris control for the backlight compensation
●BLACKFADE: Blackfade
●WHITEFADE: Whitefade
●GAIN: 18 dB:
• Press the button to set the gain value to 18 dB. This setting takes effect with the 60i and 60P recording
formats only. It is not valid when the recording frame rate is less than 22 fps or when the slow shutter
mode (1/15) is established.
USER MAIN
• When the gain value is set to 18 dB or set from 18 dB to another value, the image can be disordered
for a moment.
• If the unit is being used in the MANUAL mode or AUTO mode, set the AGC item on the AUTO SW
screen of the setting menu to OFF to use this function.
●TEXT MEMO: Text memo recording
●SLOT SEL: Selects one of the P2 card slots.
●SHOT MARK: Shot mark recording
●LEV METER: Displays the level for channels other than those set in the menu.
●MARKER: Displays markers.
●LCD REV: Displays an upside down and reversed image on the LCD.
USER1
Selects the function assigned to the USER1 button. The settings are the same as USER MAIN above.
USER2
Selects the function assigned to the USER2 button. The settings are the same as USER MAIN above.
Description of settings (Items in bold are factory settings.)
113
Setup menu list

Advertisement

Table of Contents
loading

Table of Contents