Sd Memory Card Status Display - Panasonic AG-HPX370 Operating Instructions Manual

DIR ENTRY NG CARD:
The directory structure on the P2 card is not
supported.
For details on P2 card status indications, refer to [2. P2
Card Status (used memory capacity)]

SD memory card Status Display

The status display enables a confirmation of the SD
memory card formatted condition, available memory
capacity etc. From the thumbnail menu, select PROPERTY
 DEVICES  SD CARD.
If the format is compatible with SD standards, the message
SD STANDARD : SUPPORTED
If the format is not compatible with SD standards, the
message
SD STANDARD : NOT SUPPORTED
is displayed. If this is the case, writing or reading will
not be successful. Format the card with the unit. For
more information on formatting SD memory cards, see
[Formatting SD memory cards] (page 124).
 NOTE
The indication of remaining capacity on an SD memory card
(PROXY REM) provides only a rough estimate of remaining
capacity and may differ from actual remaining capacity. SD
and SDHC memory cards with Speed Class Ratings may
indicate recording times that are significantly lower than actual
capacity, especially when used for recording a large number
of short video clips. The remaining capacity is displayed only
when proxy recording is set up to record on an SD memory
card. For details on setup procedures, refer to the User's
Guide of the video encoder card (AJ-YAX800G, an optional
accessory).
Video Encoder Card Status Display
(optional)
Attaching the video encoder card (AJ-YAX800G, optional),
select PROPERTY  DEVICES  PROXY from the
thumbnail menu.
The slot in which the video encoder card is inserted, and
version information is displayed.
18