Camera Status Display - Panasonic AG-HPX370 Operating Instructions Manual

• PMICONERROR: The P2 microprocessor does not
respond
•TEMPORARYPAUSE
IRREGULARFRMSIG:
This message indicates that the input GENLOCK
reference signal is irregular and that recording
has been paused.
•TURNPOWEROFF
This message indicates that an abnormal event has
occurred, for example, that a card was removed during
access or that a system mode change was made.
Turn the power off and then turn it back on again.
•WIRELESSRF
This message indicates that reception from the wireless
receiver is poor.

Camera status display

•ABB
ABB indicator
•ATWACTIVE
Appears when the AUTO W/B BAL switch is set to AWB
and ATW is running.
•ATW(ATWLOCK)
Appears when the WHITE BAL switch is set to B and
ATW has been assigned.
•AUTOKNEE(ON/OFF)
Displayed when changing the AUTO KNEE switch
position.
•AWB
AWB indicator
•AWBP.K/AWBP5.6K
Displays the color temperature assigned to PRST when
the WHITE BAL switch is set to PRST. Also displayed
when AWB is performed in the PRST position.
•BACKLIGHT(OFF)
Displayed during iris control when back light status is
changed by pressing the user button to which BACK
LIGHT is assigned.
•DRSON(OFF)
Displayed when DRS operation has been changed.
•GAIN**dB
Displayed when GAIN is switched.
•NDNG
Displayed when the ND filter is not positioned correctly.
•SCENE******
Displays the name of a scene file selected by turning
the SCENE FILE dial.
•SHUTTER1/****(OFF)
Displayed when the shutter speed is changed.
•SPOTLIGHT(OFF)
Displayed during iris control when back light status is
changed by pressing the user button to which SPOT
LIGHT is assigned.
•FBCON(OFF)
Displayed when FBC operation has been changed.
79