Table of Contents
Advertisement
Item
CAMERA MODE
Sets the camera shooting mode when set to [1080-59.94i], [480-59.94i],
[1080-50i], and [576-50i].
r When [SYSTEM MODE] is [1080-59.94i] or [480-59.94i]
[60i], [30P], [24P], [24PA]
r When [SYSTEM MODE] is [1080-50i] or [576-50i]
[50i], [25P]
SCAN REVERSE
Compensates image inversion that occurs when a lens for filming or anamorphic
lens is mounted.
[ON], [OFF]
ASPECT CONV
Selects aspect ratio for images recorded with 480i or 576i.
[SIDE CROP]
[LETTER BOX]
[SQUEEZE]
SETUP
Sets the setup level of video signals for 480i.
[0%]
[7.5%A]
SHOOTING MODE
Sets the shooting mode according to the shooting environment.
f [TURN POWER OFF] is displayed when the setting is changed. Turn off the
power of the camera once, and turn it on again.
[NORMAL]
[LOW LIGHT]
[SW MODE] screen
Item
LOW GAIN
Sets the gain value assigned to the L position of the <GAIN> switch.
[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
MID GAIN
Sets the gain value assigned to the M position of the <GAIN> switch.
[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
HIGH GAIN
Sets the gain value assigned to the H position of the <GAIN> switch.
[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
ATW
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
(page 54)
[Bch]
[OFF]
ATW SPEED
Sets the control speed of the auto tracking white balance.
[FAST]
[NORMAL]
[SLOW]
W.BAL.PRESET
Sets the color temperature assigned to the <PRST> position of the <WHITE BAL>
switch.
Each time the <AUTO W/B BAL> switch is pushed towards the <AWB> side,
color temperature can be switched to 3200 K, 5600 K, and user-specified variable
value.
[3.2K], [5.6K], [VAR]
Chapter 7 Menu Operations — Menu list
Description of settings
Side-crop mode (Crops the left and right edges.)
Letterbox mode (Adds black bands at the top and bottom of the
image.)
Squeeze mode (Squeezes images horizontally.)
Composite output and recording setup levels will both be set
to 0%.
Composite output setup level will be set to 7.5%, while
recording setup level will be set to 0%.
Select this when shooting in an environment with normal
brightness.
Select this when shooting in a dark environment.
f [L.L.] is displayed on the viewfinder screen.
1
2 0 1 2
2
R S
S P O T
. 4
F 5 . 6
Description of settings
Activates the auto tracking white balance function when the
<WHITE BAL> switch is set to the <B> position.
Does not assign the auto tracking white balance function to the
<WHITE BAL> switch.
A slightly faster setting than [NORMAL].
Normal setting.
A slightly slower setting than [NORMAL].
– 123 –
f Displayed only when the [SYSTEM MODE] item
is set to [1080-59.94i], [1080-50i], [480-59.94i], or
[576-50i].
f This setting is not available in the following cases:
- The [REC SIGNAL] item is set to [SDI IN].
- The [SYSTEM MODE] item is set to
- [SYSTEM MODE] is set to [1080-50i], and
- Clip connection is underway with one-clip
f This setting is not available when the [SYSTEM
MODE] item is [1080-59.94i], [1080-23.98PsF],
[1080-50i], [720-59.94P], or [720-50P].
f This setting is not available when clip connection
is underway with one-clip recording.
f This item is not displayed when the [SYSTEM
MODE] item is set to [1080-50i], [720-50P], or
[576-50i].
f If [NORMAL] is selected, the [−3dB] in the [LOW
GAIN] item, [MID GAIN] item, and [HIGH GAIN]
item of the [SW MODE] screen on the setting
menu are displayed in blue. This will operate at
[0dB] even when set.
Also, the [GAIN:18dB] item assigned to the
<USER MAIN>, <USER1>, and <USER2>
buttons becomes invalid and deactivated.
0 dB
f [L.L.] displayed when [LOW LIGHT] is selected
N D 1
appears only when the [OTHER DISPLAY] item
L.L.
on the setting menu [DISPLAY SETUP] screen is
3 : 5 9 : 5 9
set to [PARTIAL] or [ALL].
M F 6 0
Z 6
0
f When the <WHITE BAL> switch is set to the
<B> position and this menu is set to [Bch],
pressing the <USER> buttons (<USER
MAIN>/<USER1>/<USER2>) to which the auto
tracking white balance function is assigned
does not turn off the auto tracking white balance
function.
f The color temperature when [VAR] is selected is
set at the [CAM03:SETUP] screen of SmartUI.
It can be set using the jog dial button, by
assigning the [F.JOG CT] function to the <USER>
button. (page 59)
Remark
[1080-59.94i], and the [REC FORMAT] item is
set to other than [DVCPROHD/60i].
the [REC FORMAT] item is set to other than
[DVCPROHD/50i].
recording.
indicates factory setting values.
Remark
indicates factory setting values.
Advertisement
Table of Contents
