Related Manuals for Reed Instruments R7100
Summary of Contents for Reed Instruments R7100
- Page 1 R7100 Photo-Contact Tachometer Instruction Manual REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
-
Page 2: Table Of Contents
Accessing Stored Measurements ............9 Battery Replacement ..................9 Accessories and Replacement Parts ............9 Applications ....................10 Product Care ....................10 Product Warranty ..................10 Product Disposal and Recycling ..............11 Product Support ..................11 REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 3: Introduction
Introduction Thank you for purchasing your REED R7100 Photo-Contact Tachom- eter. Please read the following instructions carefully before using your instrument. By following the steps outlined in this manual your meter will provide years of reliable service. Product Quality This product has been manufactured in an ISO9001 facility and has been calibrated during the manufacturing process to meet stated product specifications. -
Page 4: Specifications
32 to 122°F (0 to 50°C) Storage Temperature: -4 to 140°F (-20 to 60°C) Operating Humidity: 10 to 90% Dimensions: 8.3 x 2.9 x 1.5" (210 x 74 x 37mm) Weight: 7.9oz (224g) REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 5: Included
1. Surface Wheel Adapter 2. Shaft Extension with Large Cone Adapter 3. Contact Adapter 4. Laser Sensor (for non-contact measurement) 5. Measure Button 6. Function Switch 7. Memory Recall Button 8. LCD Display REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 6: Operating Instructions
Install the proper RPM adapter for your application on the shaft. Press the Measure button while lightly pressing the rpm adapter against the center opening of a rotating shaft. Release the Measure button when the reading stabilizes (approx. 2 seconds). continued... REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 7: Surface Speed Measurements
Measure button will automatically be stored in memory. Display Reading Max Value Last Value Min Value Measuring Time IMPORTANT NOTE: All stored values will be erased from memory the next time the Measure button is pressed. continued... REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 8: Min Value
"LA" symbol, which represents the last value. Release the MEM button. Max Value DIGITAL TACHOMETER DIGITAL TACHOMETER Min Value DIGITAL TACHOMETER DIGITAL TACHOMETER Last Value DIGITAL TACHOMETER DIGITAL TACHOMETER continued... REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 9: Accessing Stored Measurements
Replace with 4 new AA batteries, check that the polarization is correct and reinstall the cover. Accessories and Replacement Parts R7100-TIPL Large Cone Adapter R7100-TIP Cone Adapter R7100-FUNNEL Funnel Adapter R7100-SHAFT Shaft Extension Adapter R7100-WHEEL Surface Wheel Adapter... -
Page 10: Applications
REED Instruments total liability is limited to repair or replacement of the product. REED Instruments shall not be liable for damages to goods, property, or persons due to improper use or through attempts to utilize the instrument under conditions which exceed the designed capabilities. -
Page 11: Product Disposal And Recycling
Product Support If you have any questions on your product, please contact your authorized REED distributor or REED Instruments Customer Service by phone at 1-877-849-2127 or by email at info@reedinstruments.com. Please visit www.REEDInstruments.com for the most up-to-date manuals, datasheets, product guides and software. - Page 12 TEST & MEASURE WITH CONFIDENCE CHECK OUT OUR LATEST PRODUCTS! REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
Need help?
Do you have a question about the R7100 and is the answer not in the manual?
Questions and answers