Related Manuals for Reed Instruments R8130
Summary of Contents for Reed Instruments R8130
- Page 1 R8130 Light Meter Instruction Manual REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
-
Page 2: Table Of Contents
Battery Replacement .................. 8 Applications ....................8 Appendix A: Recommended Light Levels by Application.....9-10 Product Care .................... 10 Product Warranty ..................10 Product Disposal and Recycling .............. 11 Product Support ..................11 REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 3: Introduction
Introduction Thank you for purchasing your REED R8130 Light Meter. Please read the following instructions carefully before using your instrument. By following the steps outlined in this manual your meter will provide years of reliable service. Product Quality This product has been manufactured in an ISO9001 facility and has been calibrated during the manufacturing process to meet the stated product specifications. -
Page 4: Specifications
32 to 104°F (0 to 40°C) Storage Temperature: 14 to 140°F (-10 to 50°C) Operating Humidity Range: 10 to 80% Dimensions: 7.4 x 2.5 x 1" (188 x 64.5 x 24.5mm) Weight: 14.2oz (403g) REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 5: Instrument Description
3. Battery Capacity Indicator REL MAX MIN 4. Unit of Measure 5. Peak Min Indicator 6. Peak Max Indicator 7. MIN Indicator 8. MAX Indicator 9. Relative Mode Indicator 10. Data Hold Indicator REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 6: Operating Instructions
Press the MAX/MIN button again. The "MAX MIN" symbol will appear flashing and the meter will now display the current reading, but will continue to record the highest and lowest values. continued... REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 7: Data Hold
To view the reference value, press the REL button again so that the "REL" symbol begins to flash. The displayed value will be the reference value. To exit the Relative mode, press and hold the REL button until the "REL" symbol disappears. continued... REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 8: Reset
Replace the 9V battery. Reinstall the battery cover. Applications • OSHA work environment compliance • Cinematography and photography applications • Museum exhibits • Lighting system installation • Environmental monitoring • Interior design projects • Industrial applications REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 9: Appendix A: Recommended Light Levels By Application
200~500 18~47 Cashier 750~1,000 70~93 STORE Indoor Stair 150~200 14~18 Corridors Show Window, 750~1,500 70~140 Packing Table HOSPITAL Patient Room, 100~200 9~18 Warehouse Medical 300~750 28~70 Examination Room Operating Room 750~1,500 70~140 continued... REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com... -
Page 10: Product Care
REED Instruments guarantees this instrument to be free of defects in material or workmanship for a period of one (1) year from date of shipment. During the warranty period, REED Instruments will repair or replace, at no charge, products or parts of a product that proves to be defective because of improper material or workmanship, under normal use and maintenance. -
Page 11: Product Disposal And Recycling
Product Support If you have any questions on your product, please contact your authorized REED distributor or REED Instruments Customer Service by phone at 1-877-849-2127 or by email at info@reedinstruments.com. Please visit www.REEDInstruments.com for the most up-to-date manuals, datasheets, product guides and software. - Page 12 TEST & MEASURE WITH CONFIDENCE CHECK OUT OUR LATEST PRODUCTS! REED Instruments 1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com...
Need help?
Do you have a question about the R8130 and is the answer not in the manual?
Questions and answers