HikRobot SC2000E Series Quick Start Manual page 7

SC2000E Series Vision Sensor Quick Start Guide
The safety instructions are intended to ensure that the user can use the device correctly to
avoid danger or property loss. Read and follow these safety instructions before installing,
operating and maintaining the device.
1.1 Safety Claim
● To ensure personal and device safety, when installing, operating, and maintaining the
device, follow the signs on the device and all safety instructions described in the manual.
● The note, caution and danger items in the manual do not represent all the safety
instructions that should be observed, but only serve as a supplement to all the safety
instructions.
● The device should be used in an environment that meets the design specifications,
otherwise it may cause malfunctions, and malfunctions or component damage caused by
non-compliance with relevant regulations are not within the scope of the device's quality
assurance.
● Our company will not bear any legal responsibility for personal safety accidents and
property losses caused by abnormal operation of the device.
1.2 Safety Instruction
Caution
● Do not install the device if it is found that the device and accessories are damaged, rusted,
water ingress, model mismatch, missing parts, etc., when unpacking.
● Avoid storage and transportation in places such as water splashing and rain, direct
sunlight, strong electric fields, strong magnetic fields, and strong vibrations.
● Avoid dropping, smashing or vigorously vibrating the device and its components.
● It is forbidden to install the indoor device in an environment where it may be exposed to
water or other liquids. If the device is damp, it may cause fire and electric shock hazard.
● Place the device in a place out of direct sunlight and ventilation, away from heat sources
such as heaters and radiators.
● This is a Class A device. In the living environment, this device may cause radio
interference. In this case, the user may be required to take practical measures against the
interference.
● In the use of the device, you must be in strict compliance with the electrical safety
regulations of the nation and region.
● Use the power adapter provided by the official manufacturer. The power adapter must
meet the Limited Power Source (LPS) requirements. For specific requirements, please
refer to the device's technical specifications.
● It is strictly forbidden to wire, maintain, and disassemble the device is powered on.
Chapter 1 Safety Instruction
1