HikRobot SC2000E Series Quick Start Manual page 20

SC2000E Series Vision Sensor Quick Start Guide
1) Go to NIC settings page: Control Panel → Hardware and Sound → Device Manager
→ Network Adapter.
2) Select corresponding network interface card, and click Link Speed.
3) Set Speed and Duplex as Auto-Negotiation or 100 Mbps.
7.2 Install Client Software
SCMVS is a client software for device configuration and remote operations.
Note
● Check the Windows version. The client software is compatible with 32/64-bit Windows
7/10.
● You can get the client software installation package from https://en.hikrobotics.com/.
● The graphic user interface may differ by different versions of client software you use.
Steps
1. Double click the installation package to install the client software.
2. Select the language.
3. Read and check Terms of the License Agreement.
4. Click Start Setup.
5. Select installation directory and click Next.
6. Finish the installation according to the interface prompts.
Figure 7-2 Installation Interface
14