Nortel Meridian Meridian 1 Feature Description And Administration page 876

Page 876 of 1814
- - INC_T306 0,(2),...,T306
(T306 is the
duration of the
T306 Network
timer in seconds)
- - OUT_T306 0,2,...,(T306)
(T306 is the
duration of the
T306 Network
timer in seconds)
- LAPD (NO) YES
LD 16 – Configure a COT, DID/DOD, or TIE route using the Telecom New Zealand (TCNZ)
protocol.
Prompt Response
REQ NEW, CHG
TYPE RDB
CUST xx
ROUT xx
...
DGTP PRI2
ISDN YES
MODE PRA
...
IFC TCNZ
553-2901-301 Standard 9.00 January 2002
ISDN PRI Central Office Connectivity
Description
New, or change.
Route Data Block.
Customer number.
Route number.
Type of digital route.
Default for a PR!2 route.
Primary Rate Access.
Telecom New Zealand (NEAX-61).
Variable timer for received DISCONNECT message on
incoming calls, allowing in-band tone to be heard when
sent by the network. The network will stop sending
tone after T306 expires, so the maximum time will be
T306.
Entered in two-second increments.
TCNZ interface: T306 = 30 sec.
Variable timer for received DISCONNECT message on
outgoing calls, allowing in-band tone to be heard when
sent by the network. The network will stop sending
tone after T306 expires, so the maximum time will be
T306.
Entered in two-second increments.
TCNZ interface: T306 = 30 sec.
Change the Link Access Protocol for D-channel
parameters.