Optional Sending Of Last Forwarding Dn As Clid - Nortel Meridian Meridian 1 Feature Description And Administration

Optional sending of last forwarding DN as CLID

In a call redirection scenario (Call Forward All Calls, Call Forward No
Answer, Hunt, and the ACD redirections, Night Call Forward and Interflow)
occurring at a gateway node, the (optional) capability, on a per system basis,
of sending the last forwarding DN as Calling Line Identification (CLID)
information. This functionality is controlled by a new prompt, the OCLI
(Outgoing CLID) prompt, that has been introduced in Overlay 15 and which
has three possible responses (NO, EXT, or ALL).
This new functionality applies to the following types of calls being redirected
at a gateway node, as described in the pages that follow.
Note: There is a limitation on the functionary if the last redirection is
due to ACD NCFW or Interflow, and if the redirection is preceded by one
or more redirections on the same node. In such a case, the called number
on the node is sent as CLID rather than the ACD DN.
• Incoming EuroISDN DID or Central Office calls coming from a Public
Network Central Office or a Private Exchange over a standard ISDN
connectivity, are forwarded back to the Public Network.
Note: Standard ISDN connectivity means all supported ISDN
connectivities including, EuroISDN, Asia Pacific, and NI-2.
— Station A, located at a Public Network Central Office or a Private
Exchange, calls Station B at a Gateway node. Station B is redirected
to Station C, located at the same or another Public Network Central
Office or Private Exchange as Station A. If OCLI = EXT or ALL,
the CLID of Station B is sent to Station C. Refer to Figure 63.
EuroISDN Continuation Phase III
International ISDN PRI Feature description and administration
Page 671 of 1814