Feature Implementation; Task Summary List - Nortel Meridian Meridian 1 Feature Description And Administration

Feature implementation

Task summary list

LD 17 - Configure remote D-channel capability for EuroISDN interface for PRI and BRI.
Prompt Response
REQ CHG
TYPE ADAN
- ADAN CHG DCH xx
...
- IFC EURO
...
RCAP MCID
EuroISDN Malicious Call Identification
Basic Rate Interface (BRI) connectivity requires:
• Basic Rate Interface (BRI) package 216
• ISDN Basic Rate Interface Trunk Access (BRIT) package 233
The following is a summary of the tasks in this section:
1 LD 17 - Configure remote D-channel capability for EuroISDN interface
for PRI and BRI.
2 LD 16 - Configure remote capability for EuroISDN interface for PRI.
3 LD 16 - Configure remote capability for EuroISDN interface for BRI.
4 LD 15 - Modify system and software parameters.
5 LD 10 - Configure analog (500/2500 type) sets.
6 LD 11 - Configure Meridian 1 proprietary sets.
7 LD 12 - Attendant Consoles.
8 LD 57 - Configure Flexible Feature Codes for Analog (500/2500 type)
sets.
9 LD 16 - Configure Malicious Call Trace Timer and Tandem Delay.
Description
Change existing data.
Action Device and Number.
Change D-channel.
EuroISDN interface for D-channel.
Add Malicious Call Identification as a new remote capability.
International ISDN PRI Feature description and administration
Page 727 of 1814