DID-to-network Calling
Contents
Feature description
The following are the topics in this section:
Feature description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature interactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature implementation . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature operation . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This feature facilitates Direct Inward Dialing into the private ISDN. The
Direct Inward Dial (DID) call will be treated as though the entire ISDN is a
large PBX.
DID calls entering the network at the local node (that is, the node on which
the destination set resides) are unaffected by the feature's operation. In this
case, treatment of the DID call is the same as with the stand-alone
configuration. The DID-to-Network Calling feature affects only those DID
calls which enter the network at a node other than the destination set's node.
Routing of the DID call across the ISDN will be the same as the routing of a
network call originated from within the network. (An additional information
element is sent with the call set-up message, to indicate that the network call
originated from a DID trunk.)
International ISDN PRI Feature description and administration
Page 537 of 1814
537
538
538
538
538
538