Nortel Meridian Meridian 1 Feature Description And Administration page 831

LD 15 – Configure the Customer Data Block for Asia Pacific with Calling Line Identification.
Prompt Response
REQ: CHG
TYPE: NET
CUST xx
OPT a...a
AC2 aaaa
...
CLID YES
- SIZE 0-(256)-4000
- INTL 0-9999
ISDN PRI Central Office Connectivity
4 LD 17 – Configure nB+D for Hong Kong, Japan, New Zealand, and
Malaysia.
5 LD 17 – Configure the Bearer Capability for the Asia Pacific
connectivity D-Channel.
6 LD 16 – Configure Asia Pacific ISDN PRI Route Data Block.
7 LD 14 – Configure Asia Pacific ISDN PRI trunks.
8 LD 73 – Define the frame format and grade of service timers for a
PRI/PRI2 loop.
Description
Change existing data.
Networking data (if REQ = CHG only.)
Customer number.
xx = 0-99 for Options 51C-81C.
xx = 0-31 for Option 11C.
Options.
Access Code 2 as defined in LD 86 (aaaa = NPA, NXX,
INTL, SPN, or LOC).
Configure CLID option for Asia Pacific.
The maximum number of CLID entries needed for a
customer.
Note: Do not define a size much larger than actually
needed. This entry may be increased or decreased as
required.
Country code, for international number.
International ISDN PRI Feature description and administration
Page 831 of 1814