Upgrading Firmware - Mpio FG200 User Manual

Upgrading Firmware

Refer to page 15 [Installing the software] for information on how to install MPIO Utility.
1 Download the firmware from MPIO web site and save it on the PC.
(www.mpio.co.kr)
2 Turn the player off, and connect to the PC using the USB cable.
3 Double-click MPIO Utility icon in your desktop.
Click the [F/W Upgrade] button.
4
Click
Select the downloaded Upgrade.FG200.dwu file in the [ Browse ] window and then,
6
click the [ Open ] button.
Click
Click the [ OK ] button.
5
Click
Note
The firmware upgrade file that you can download
from the MPIO website is compressed as a Zip file.
"Upgrade_FG200.dwu" file will be created when
you uncompress the zip file.
7 Click the [ OK ] button after the Hardware Safely
Removed message appears as shown.
Click
Separate FG200 from the computer. When FG200 is turned ON, the firmware will be upgraded automatically.
9
(The upgrade status will be shown in the LCD screen as shown below.)
When the firmware upgrade is complete,
FG200 will be turned OFF automatically.
Caution
Causing outer impact on FG200 or lack of battery during firmware upgrade may cause a malfunction.
8 After clicking the [ OK ] button, the first part of
firmware upgrade is complete.
Click