Saving The Initial Setting Value; Upgrading The Firmware - Mpio FY500 User Manual

Saving the initial setting value

If the player memory is formatted using Windows Format command (FAT or FAT16), the default
setting values of the player should be restored using the Setup Config function of MPIO utility.
To see how to install MPIO utility, refer to [Installing the operating software] in page 12.
Turn the player on and connect it to the PC using an USB cable.
Double click the "MPIO Utility" icon on the desktop.
Click the [Setup Config] button.
Click!!
Click the [OK] button to complete Setup
Config (Restores the default settings).
Unplug the player from the PC.
Click!!
Click the [OK] button.
Click!!
Upgrading the firmware
To see how to install MPIO utility, refer to [Installing the operating software] in page 12.
Download the latest firmware from the MPIO web site, and uncompress and save it in the PC.
(www.mpio.com)
Turn the player on and connect it to the PC using an USB cable.
Double click the "MPIO Utility" icon on the desktop.
Click the [F/W Upgrade] button.
Click!!
Select the 'Upgrade.FY500.dwu' file from the [Browse File] window and click the [Open]
button.
Click!!
Click the [OK] button.
Click!!
The firmware upgrade file is
compressed (zip file), which is provided
by the MPIO homepage. When you
uncompress the file, the revision details
(.txt) and Upgrade.FY500.dwu file can
be found.