Thanks for your purchasing MPIO DMK+. This Manual pro- vides you with the method of operation and caution. Be sure to read this manual before using this product. MPIO will always try to make better product. Any form of imitation, copying, reproduction or translation in...
Computer to the MP3 Player. In order to download music to the MP3 Player; 1. Install MPIO Manager 2 of the Install CD in the computer. (Refer to the Page 16) - MPIO Manager 2 is the Communication Window between the computer and MP3 Player.
4. Warning You should be fully aware of the notice below, before using the product. The company does not take the responsibility for the defect of the product (accessory, connecting device etc.), damage, data loss, accident & disorder etc., occurred from not fully understanding the notice below, so please be sure to check this notice.
6. Control's Overview [Front Panel] [Rear Panel] [Front Panel] 1. USB Port 2. Earphone Jack 3. Hold Slide 4. LCD 5. Volume Button 6. Play/Pause Buttton 7. Jog Button 8. MIC [Rear Panel] 8. The Hole For Necklace Type Earphone 9.
• The level of volume is 00~40. (4) Turn Off the MPIO To turn your MPIO off, press and hold the button. • If you do not press any button during in the pause, MPIO will automatically turn off after 3 minutes. English (5) LCD Display...
(6) Menu Setup • Press and hold Jog button vertically and four menus are displayed on the LCD. • Shift Jog button to the direction to move within the menu. When you press the Jog button vertically, you can move to the submenu or selected mode will be saved.
Menu Detail Information : Make the time of Backlight shortly [B/L (Backlight)] : Make the time of Backlight long • You can adjust the time 00 Backlight Off 01-10 : 1~10 seconds 20: 20 seconds 30: 30 seconds [Ent (Enter)] Move to upper level •...
Due to the copyright restrictions on Music File (MP3/WMA/ASF), you cannot upload it to the computer. - If you install MPIO Manager 2 program on the PC while it is connected to MP3 Player, the Manager Program might misop- erates. Please remove USB Cable from PC before installing MPIO Manager 2 program.
2. Connecting MPIO to the Computer 1. Connect the USB cable to the USB Port in the computer. 2. Turn the power of MPIO on and connect the USB cable to the MPIO. 3. Check the USB CONNECTED message on the MPIO LCD.
- You can find the lists by selecting Internal Memory/Memory Card/All Memory. 8. Memory Information Part 9. MPIO Audio - Plays files stored on the computer (MP3/WMA/ASF/WAV). 10. Audio List Window - Shows Audio Play List. 11. Audio Information Part...
Firmware information. English 3) Basic Function A. File Download 1. Turn the power of MPIO on and connect the USB cable to the PC and MPIO. 2. Check the "USB CONNECTED" message on the MPIO LCD. 3. Run MPIO Manager 2.
4. Check the Internal Memory/ Memory size card in the memory information part. 5. Select a Memory Item from Menu Bar of the MPIO Manager 2. 6. Select a Memory you perform format in. 7. If a confirmation window for memory format appears, select 'OK' button.
• Playing time of a file is displayed. • Displays bit rate of the file playing. 6. MPIO Visual LCD Activation Button - Visual LCD Screen is activated. 7. MPIO Visual LCD • Display the Visual Screen while playing a file.
Q1. I connected the MPIO to the PC, however the message, "USB CONNECTED" does not appear on the MPIO LCD. A1. Check if the power of MPIO is on and the USB cable is inserted into the MPIO. Q2. Music file stored in the MPIO is not uploaded to the PC.
Need help?
Do you have a question about the DMK PLUS and is the answer not in the manual?
Questions and answers