Before Installing The Transcoder - Mpio HD 400 User Manual

Before installing the Transcoder

To use the movie playback function appropriately, use the included PMP Transcoder to convert
the file into the required format.
All convertible files types may be converted and tested using the Transcoder.
About Transcoder...
MP4 PMP Transcoder is a program that converts the WMV, ASF, MPEG4, DivX, AVI file formats use
in desktop PC environment into MP4 file format, which can be played by the PMP Player HD400.
 Supported File Types: AVI, MPEG4, WMV, DivX
The following hardware, software requirements must be met for the Transcoder to operate.
H/W Requirements
 CPU: Intel Pentium4 1 GHz or higher
 HDD: 20 MB or more
S/W Requirements
 Microsoft DirectX 9.0 or later (required)
 Microsoft Media Player 9.0
 Unified Codec Pack (K-Lite Codec Pack) (http://www.k-litecodecpack.com)
 OS : Windows98 SE / Windows ME / Windows 2000 / Windows XP
 Please check the hardware specification of the PC to make sure it supports the Transcoder. The
software specifications may be checked by downloading the required programs from the internet.
Note
 Pixtree Transcoder, the video conversion program used in MPIO SOLID does not support Macintosh.
Therefore, Transcoder cannot be used in Macintosh.
 Even if K-Lite codec was installed, the video file conversion with Transcoder may not be performed
depending on the user's PC environment. In such case, please download and use other combined codec from
the Internet.
73