Using The Built-In Flash; Switching Flash Modes - Leica V-Lux 3 Instructions Manual

Applicable modes:

Using the Built-In Flash

A To open the flash
Press the flash open button.
B To close the flash
Press the flash down until it clicks into place.
•
Be sure to close the flash when not in use.
•
The flash setting is fixed to [Œ] while the flash
is closed.
Note
•
Be careful not to pinch your fingers when you close the flash.

Switching flash modes

Set the flash mode to match the recording situation.
•
Open the flash.
Select [FLASH] in the [REC] Mode menu.
Press 3/4 to select a mode and then [MENU/SET].
•
Exit the menu after it is set.
Recording
(P48)
- 67 -