Table of Contents
Advertisement
9.
Stabilizer, Zoom and Flash
Flash exposure compensation
Available in the following modes:
You can adjust the flash exposure to compensate for pictures in which the parts mainly
illuminated by the flash would otherwise appear too dark or bright.
1
Select the menu.
>
MENU
2
Press 3/4 to select [Flash Adjust.] and then [MENU/SET].
3
Press 2/1 to set the flash output and then [MENU/SET].
•
You can set from [j3 EV] to [
•
Select [n0] to return to the original flash output.
•
[
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
•
The [Flash Adjust.] setting also applies to an external flash unit.
Synchronizing the output of the built-in flash unit to the set Exposure
Compensation
Available in the following modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to P160.
•
The [Auto Exposure Comp.] setting also applies to an external flash unit.
[Rec] > [Flash]
i
3 EV] in steps of 1/3 EV.
(P290)
205
(P290)
Advertisement
Table of Contents
