Taking Pictures Using The Built-In Flash - Leica D-Lux 2 Operating Instructions Manual

Taking Pictures using the Built-in Flash

When you set the flash, you can take
pictures using the built-in flash according to
the recording condition.
■ To open the flash
Slide the [< OPEN] switch
A
Photo flash
B
• Do not cover the photo flash with your
fingers or any other items.
■ To close the flash
Press the flash until it clicks.
• Be sure to close the flash when not in use.
• The flash setting is fixed to Forced OFF
[v] while the flash closes.
40
Recording pictures (basic)
.
A
■ Switching to the appropriate flash
setting
Set the flash setting of the built-in flash
according to the scene to be recorded.
For the selectable flash settings, refer to
"Available flash settings by recording
mode" on P42.