Entering Text - Leica V-Lux 3 Instructions Manual

Entering Text

It is possible to enter babies' and pets' names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
Display the entry screen and press 4 to move to the character
selection section.
•
You can display the entry screen via the following operations.
–
[NAME] of [BABY1]/[BABY2] or [PET] in Scene Mode
–
[NAME] in [FACE RECOG.]
–
[LOCATION] in [TRAVEL DATE]
–
[TITLE EDIT]
Press 3/4/2/1 to select text and then [MENU/
SET] to register.
•
Press [DISPLAY] to switch text between [A] (capitals), [a]
(lower case) and [&/1] (special characters and numbers).
•
The entry cursor position can be moved left and right with the
zoom lever or the setting wheel.
•
To enter a blank, move the cursor to [SPACE], to delete an entered character, move the
cursor to [DELETE], or to stop editing during text entry, move the cursor to [CANCEL],
and press [MENU/SET].
•
A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [FACE RECOG.])
Press 3/4/2/1 to move the cursor to [SET] and then [MENU/SET] to
end text input.
Notes
•
Text can be scrolled if all of the entered text does not fit on the screen.
•
It is displayed in order of title, location, [NAME] ([BABY1]/[BABY2], [PET]), [NAME]
([FACE RECOG.]).
Recording
- 107 -