[VIDEO DIVIDE]
Recorded motion pictures can be split. It is recommended, e.g. for when you want to
separate a part you need from one part you do not need.
A motion picture cannot be restored once it has been split.
Select [VIDEO DIVIDE] on the [PLAYBACK] Mode menu.
Press 2/1 to select the motion picture to divide, and then [MENU/
SET].
Press 3 at the location to split.
•
The motion picture is played back from the same location when
3 is pressed again.
•
You can finely adjust the location for the separation by pressing
2/1 while the motion picture is paused.
Press 4.
•
A confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
•
Motion pictures may be lost if the card or battery is removed while processing the
separation.
Notes
•
[VIDEO DIVIDE] may not be performed for motion pictures recorded with other equipment.
•
Motion pictures cannot be split at a location close to the start or end.
•
The order of pictures will change when motion pictures are recorded in [MP4], or with
[HIGH SPEED VIDEO] in Scene Mode if split.
It is recommended to search these motion pictures by using [CALENDAR] or [VIDEO ONLY] in
the [MODE PLAY].
•
Motion pictures with a short recording time cannot be split.
Playback/Editing
- 142 -
(P48)