[Quick Af] - Leica V-Lux 3 Instructions Manual

∫ Changing position and size of the AF frame (Only when [Ø] is selected)
If you performing any of the following operations, the screen will switch to the settings
menu.
•
When [Ø] is selected, press [FOCUS].
•
From the menu screen, select [Ø], and press
•
From the Quick Menu screen, when [Ø] is selected, press [DISPLAY].
1
Press 3/4/2/1 to move the AF frame.
•
You can move the frame to any position on the screen except the
edges.
•
After moving the AF frame, press [DISPLAY] to return it to the center.
2
Rotate the setting wheel to change the size of the AF frame.
Setting wheel right: Enlarge
Setting wheel left: Reduce
•
It can be changed to 4 different sizes.
3
Press [MENU/SET] to set.
Notes
•
The AF frame cannot be moved during motion picture recording.
•
The spot metering target can also be moved to match the AF frame when using [Ù].
•
The position of the AF frame will return to initial state when the camera is set to Snapshot
mode, when the Sleep Mode is activated, or when the camera is turned off.
•
In the following cases, the AF frame and size will be in the center, large, and will not represent
your settings.
–
During Digital Zoom
–
When it is hard to focus due to darkness

[QUICK AF]

Applicable modes:
As long as the camera is held steady, it will automatically and continuously adjust the
focus setting. Focusing will then be quicker when the shutter is pressed. This is useful
when you do not want to miss a picture-taking opportunity.
[OFF]/[ON]
Notes
•
The battery will be consumed faster than usual.
•
Press the shutter release button halfway again when it is difficult to focus on the subject.
•
This mode is not available together with AF tracking.
•
You cannot set [QUICK AF] in the following cases.
–
In [PANNING], [STARRY SKY], [FIREWORKS] and [HIGH SPEED VIDEO] in Scene Mode
–
When using Manual Focus
Recording
1 .
- 120 -