Advertisement
Quick Links
INSTRUCTION FOR USE
Electric wheelchair
Product code: D130HL / D130AL
1. Introduction
Dear User, thank you for choosing and purchasing the lightweight,
comfortable, efficient and energy-saving D130 series electric
wheelchair. Before use, please read the instruction manual to become
more familiar with the functions of the electric wheelchair. Clean and
maintain the wheelchair on a regular basis as recommended in this
manual.
If you have any questions, please contact the distributor.
2. Safety information
• Read the instruction manual before using the wheelchair.
• Do not use the wheelchair before all disassembly and assembly
steps have been completed.
• It is not recommended that the wheelchair be used by people with
dysfunctions that prevent them from using the wheelchair
independently.
• Do not make independent repairs or structural modifications.
Use only original spare parts.
• Do not get on or off the wheelchair while the control module
(joystick) is on.
• Do not get on or off the wheelchair without the assistance of a third
person when the push mode is on.
• Do not use the wheelchair without anti-tip wheels.
• Do not lean too far out of the wheelchair to pick up an object lying
on the front, side or back of the wheelchair, as this risks tipping the
wheelchair over.
Page 1 z 22
Advertisement
Related Manuals for Timago Electric-TIM I
Summary of Contents for Timago Electric-TIM I
- Page 1 INSTRUCTION FOR USE Electric wheelchair Product code: D130HL / D130AL 1. Introduction Dear User, thank you for choosing and purchasing the lightweight, comfortable, efficient and energy-saving D130 series electric wheelchair. Before use, please read the instruction manual to become more familiar with the functions of the electric wheelchair. Clean and maintain the wheelchair on a regular basis as recommended in this manual.
- Page 2 • Do not stand on the footrest, as you risk tipping the wheelchair over. • Avoid sudden changes of direction on a hill. • The wheelchair may be used by only 1 person. • Slow down to 2 km/h before making a turn. •...
- Page 3 3. Characteristic A. APPLICATION The electric wheelchair is designed for people: • Who have problems with independent movement. • With dysfunctions and movement limitations. • With cardiovascular diseases. • With weakness of the body due to advanced age. B. COMPONENTS Figure 1 Page 3 z 22...
-
Page 4: Product Features
C. PRODUCT FEATURES • Energy-saving and powerful motor. • Easy to assemble and disassemble folding frame. Page 4 z 22... -
Page 5: Specifications
• Control module: push-button on/off, button illumination, universal joystick, horn. • Safe and reliable electromagnetic brake. • Anti-tip wheels. • Fully enclosed, maintenance-free battery. • Calf safety belt. • Two modes of operation: electric drive mode and push (manual) mode. D. - Page 6 Atmospheric pressure: 86[kPa]~106[kPa] • Internal power supply: DC24[V]±5[V] • Electrical requirements: application part type B. • Operating mode: continuous. • Degree of protection against water ingress: IPX4. • Motor power: approx. 130[W] for the right and left motors. • The device cannot be used in the environment of flammable gases mixed with air, oxygen or nitrous oxide.
- Page 7 Figure 3 Figure 4 Figure 6 Figure 5 Note: Do not hold the tubes against the seat when unfolding the wheelchair, due to the risk of getting your fingers caught in the hinges. Page 7 z 22...
- Page 8 • Unfolding the backrest: hold the handles with your hands, lift the backrest in an upward direction until the backrest lock pin engages, see Figure 7. • Folding the backrest: Press and hold the Figure 7 backrest breaking lock and then lower the backrest in the downward direction after making sure the locking pin has popped out of the hole, see Figure 8.
-
Page 9: Control Module Functions
• Tilting the footrests (applies to the D130HL model): to tilt the footrests, position the footrest plates perpendicular to the ground and lift the footrest in an upward direction, see Figures 11 and 12. Figure 11 Figure 12 • Adjusting the position of the control module: the adjustment should be done while sitting in the wheelchair. - Page 10 • Battery gauge - informs about the level of charge of the battery. The green LED is lit: the battery fully charged. Yellow or red LED is lit: battery discharged. Charge the battery as soon as possible for proper operation of the wheelchair. To check the battery charge level, hold down the power button for a while.
- Page 11 Figure 16 C. CHARGER • The set includes a charger with an output for DC24[V] 3[A] lithium battery charger. • When charging, turn ON the power button on the battery case and turn OFF the control module. • Note: The switch on the battery case is OFF at the time of delivery •...
- Page 12 D. USING • To start using, turn on the switch on the battery case. • Switch the lever from push to electric mode. Note: Do not switch driving modes on a hill. When switching modes on a flat surface, first turn the rear wheels slightly and then switch the driving mode.
- Page 13 • When stopping on an incline and operating the wheelchair in manual (push) mode, lock the wheels by moving the handbrake lever toward the rear of the wheelchair, see Figure 18. • Use the speed adjustment button on the control module to adjust the Figure 18 maximum speed according to your physical condition and road conditions.
- Page 14 ✓ Hand brake: monthly ✓ Frame: every 3 months ✓ Control module: every 3 months ✓ Motor: every 3 months ✓ Battery: every 3 months ✓ Connectors: every 6 months ✓ Upholstery: every 6 months ✓ Tire: every 6 months ✓...
- Page 15 b. No air (1) Inflate the wheel to 30% of the total volume and press the tire evenly with your hands so that the tire and rim fit evenly. (2) Inflate the wheel to the desired pressure value. 9. Wiring: check electrical parts and wiring for damage. If defected, contact the distributor.
- Page 16 the red LED is lit, then the battery capacity is very low. Immediately charge the battery to avoid voltage drop affecting the battery life. 2. The battery is marked with positive and negative electrode symbols, and the battery charging circuit is connected in an optimal way.
- Page 17 Folding the wheelchair – see Figures. 19, 20, 21 Figure 19 Figure 20 Figure 21 • Before traveling by air, discharge the battery to 1/3 capacity. The red or yellow-red LED should be lit. The voltage should be about 26[V]. •...
- Page 18 off. In that case, turn the power switch on the battery case on and off. • If a problem occurs, the control module will sound an alarm in the form of beeps and diagnostic LED flashes. The number of beeps and LED flashes indicates the type of problem.
- Page 19 Damage to the control Consult the distributor. module Damage to the control Consult the distributor. module • Most defects are related to the battery, motor or control module, description of possible defects below. Defect Cause Connection error between the battery and the control module.
- Page 20 The battery charging voltage is too high. High battery voltage The voltage should not exceed 29.4[V] at the end of charging. The motor connector and control module are not properly connected. Reconnect Motor doesn't work the connector and control module. Damaged motor - contact the distributor.
- Page 21 Page 21 z 22...
- Page 24 JIANGSU YUYUE MEDICAL EQUIPMENT & SUPPLY CO., LTD. No.1 Baisheng Road Development Zone, Danyang, Jiangsu 212300, China Metrax GmbH Rheinwaldstr. 22, D‐78628 Rottweil, Germany Timago International Group Spółka z o.o. i Spółka – Spółka komandytowa ul. Karpacka 24/12 43-316 Bielsko-Biała, Polska T.: +48 33 499 50 00 F.: +48 33 499 50 11...
Need help?
Do you have a question about the Electric-TIM I and is the answer not in the manual?
Questions and answers