Download
Share
Print this page
Timago POWER-TIM Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Timago Manuals
  4. Wheelchair
  5. POWER-TIM
  6. Instructions for use manual

Timago POWER-TIM Instructions For Use Manual

Electric wheelchair
Hide thumbs Also See for POWER-TIM:

Advertisement

Quick Links

Download this manual
INSTRUCTIONS FOR USE
Electric wheelchair
Product code: POWER-TIM
1. Security information
• Read instruction before using a wheelchair.
• Do not use wheelchair before unfolding and assembling it.
• It is not recommended for people with disabilities preventing
them from self-usage to use a wheelchair.
• Maximum capacity cannot exceed 130 kg.
• Wheelchair can be used only by one person at the time.
• During ride, it is recommended to keep feet on footrests and
forearms on armrests.
• Before ride check the battery level on control panel.
• Electric wheelchair should be used only on flat surface or low
elevations. Do not drive on surface tilted more than 12 degrees.
• Do not drive wheelchair with maximum speed while driving
uphill or downhill.
• Do not drive wheelchair on soft and slippery surfaces such as
mud, sand etc.
• Do not drive wheelchair sideways on highly elevated surface
• Do not add additional loads to wheelchair in form of caravan
etc.
• Do not make any fixes or reworks on wheelchair construction
independently.
manufacturer.
• Do not stand up or sit down on a wheelchair while control
module is turn on.
• Do not use wheelchair without anti-tipping wheels.
• Do not get on or get off the wheelchair without help of third
person when manual mode is on.
Use
only
original
1
spare
parts
from

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWER-TIM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Timago POWER-TIM

Summary of Contents for Timago POWER-TIM

  • Page 1 INSTRUCTIONS FOR USE Electric wheelchair Product code: POWER-TIM 1. Security information • Read instruction before using a wheelchair. • Do not use wheelchair before unfolding and assembling it. • It is not recommended for people with disabilities preventing them from self-usage to use a wheelchair.
  • Page 2 • Do not lean forward to grab items laying in front, on side or behind the wheelchair. It might result in wheelchair falling over. • Do not stand on footrest. It might result in wheelchair falling over. • Avoid rapid direction changes while driving on elevations. •...
  • Page 3 A. ELEMENTS OF THE WHEELCHAIR...

  • Page 4: Product Characteristics

    B. PRODUCT CHARACTERISTICS • Efficient engines with high-power of 2x250 [W] • Aluminium, folding frame • Pumped back 16” wheels • Control module: turn on/off button, buttons with LED lights, joystick, horn button, speed adjustment buttons, battery charge level indicator •...
  • Page 5 • Ingress protection level for engine: IP33 • Engine power level: around 250[W] for right and left engine • Wheelchair cannot be used in area with flammable gas mixed with air, oxygen or nitrous oxide. 3. Icon description Symbol Meaning Safety Classification type B Important! Read the instruction Protection against access to hazardous parts...
  • Page 6 • Unfolding backrest: catch handles with hands, lift up backrest till you hear clicking sound of blocking pin (look: picture 1). • Folding backrest: Press and hold seat clamps. Check if blocking pins are unlocked and then lower the backrest (look: picture Note! Do not keep fingers close to backrest hingers.

  • Page 7: Control Module Functions

    • Regulation of control module position: Regulation should be only done while sitting in wheelchair. Loosen mounting screw and move mounting bracket forward or backward to set it to appropriate length, then tighten the screw. • Armrest tilting: Wheelchair armrests can be tilt. Push clips located on outside of the wheelchair (look: picture 8) and lift armrests (look: picture 9).
  • Page 8 Note! Control module has option to install additional module with flashlight and USB port. Unplug power supply cabel for third person control module and plug in additional module in its place. LED display Status Meaning/Description All LED lights are turned off Wheelchair is turned off or in sleep mode.
  • Page 9 Wheelchair is turned on. Lights color suggest battery level charge. All LED lights are turned on Green – fully charged, red – battery exhausted. Battery running low. Blinking red LED light Charge battery as fast as possible. Wheelchair battery is charging. When wheelchair is close to being fully LED light up in sequence from left to charged, frequency of lights blinking slows...

  • Page 10: Method Of Use

    • Put charger plug into charging port in control module first. Then connect charger to power supply (outlet) • Check if circuit connection is correct. • Do not modify charging circuit connection. • To avoid fire or burnout, do not unplug charging circuit while battery is charging.
  • Page 11 • Wheelchair should only be used on flat surfaces. Driving on muddy or uneven surfaces can cause control system damage. 6. Technical data Product code POWER-TIM Overall height 91 cm Overall width 69 cm...
  • Page 12 7. Cleaning and maintenance • It is recommended to regularly inspect wheelchair construction and its elements (wheels, frames, cabels, control module, brakes etc.). • It is recommended to regularly check pressure level in back wheels. • Used wheelchair parts needs to be replaced (to do it, contact the Seller).
  • Page 13 • Wheelchair folding: go through assembly steps in reversed order. B. STORAGE Wheelchair should be keep in dry and well-ventilated space. Avoid: high temperatures and its rapid changes, acids, alkalis and corrosive chemicals. C. WEATHER CONDITIONS FOR STORAGE Temperature: -40[°C] ~+50[°C] Humidity: <95% Atmospheric pressure: 56[kPa] ~106[kPa] 9.
  • Page 14 Battery/charger Check if power cords are tighten failure Left engine Check if power cords connected to left failure engine are tighten. Right engine Check if power cords connected to right failure engine are tighten. Check if power cords connected to left Failure of left brake are tighten.
  • Page 15 - damages resulted from: self-repairs, changes in product construction, drop, transport, inappropriate usage, noncompliance to the instruction, natural disasters (fire, earth shake, floods) • Product code is located on wheelchair frame.
  • Page 16 Nan Liu Zhai Village, Wen’an County, Langfang City, Hebei Province, China SUNGO Cert GmbH Harffstr. 47, 40591 Düsseldorf, Germany Timago International Group Spółka z o.o. i Spółka – Spółka komandytowa ul. Karpacka 24/12 43-316 Bielsko-Biała, Poland T.: +48 33 499 50 00 E.: info@timago.com...