Page 1
INSTRUCTIONS FOR USE Aluminium reclining wheelchair Product code: ALH 008 1. Characteristics The wheelchair is made of aluminium frame, reinforced with double cross bar and is equipped with supplementary transverse stabilization at the hand grips for an accompanying person. The wheelchair possesses nylon-cotton seat which is additionally upholstered by the covers which are made of air permeable fabric.
Page 2
d. Armrest e. Assembly knob f. Wheel lock g. Fixing screw of transverse stabilization h. Handrim i. Calf pad j. Footrest k. Footrest lever l. Assembly pin of the footrest Adjustment of the centre of gravity n. Anti-tip wheels 2. Application The aluminium wheelchair is designed for people who have problems with unassisted moving and for patients with dysfunctions and reduced mobility.
Page 3
Step 2. Assembly of footrests Assemble the right and the left footrest in the front part of the frame by placing them on two pins and turn them inwards until they are locked. Step 3. Adjustment of footplates Adjust the right and the left footplate by tightening the screw placed at the bottom of footrests with included key.
Page 4
On completion of the above activities, the wheelchair is ready to use. FOLDING The wheelchair can be re-folded in order to be transported and stored more easily. • Swing away the footplates and set them in vertical position (perpendicularly to the ground). •...
Page 5
ATTENDANT BRAKES The levers of the brakes are located under the hand grip on the right and left side and are connected with united brake by cable. • In order to apply emergency braking or stopping lock, squeeze the lever of the brake, and in order to release the brake, drop the levers.
Page 6
ADJUSTMENT FOR PATIENT AFTER AMPUTATION IN THE LOWER LIMBS AREA Note! For professional adjustment, ask your retailer or other person who has appropriate knowledge and qualifications. Do not adjust inclination angle of the seat by yourself. • To adjust the centre of gravity, unscrew fixing screw in right and left wheel.
Page 7
5. Notes and recommendations Timago International Group does not bear responsibility of improper moving on the wheelchair, failure to comply safety regulations and misuse. 6. Cleaning and maintenance Carry out the maintenance of the wheelchair components regularly: • The upholstery and the cushion can be cleaned with damp (not wet) cloth and cold or warm water, without the use of detergents.
Page 8
The manufacturer checked for compliance with essential medical devices requirements. Our complete line of products is available from our distributors. Learn more at: www.timago.com. Thank you for choosing Timago! Timago International Group Spółka z o.o. i Spółka – Spółka komandytowa ul.
Need help?
Do you have a question about the ALH 008 and is the answer not in the manual?
Questions and answers