* Ensure a minimum clearance width of 0.6 meters (24”) for access to and Clean Grips As Needed passage around MATRIX strength equipment. Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs. Lubricate Guide Rods As Needed Upholstery &...
Ensure a minimum clearance width of 0.6 to smooth operating equipment as well as keeping your liability to meters (24”) for access to and passage around MATRIX strength equipment. Please note, 0.91 a minimum. Equipment needs to be inspected at regular intervals.
Page 4
ENGLISH ASSEMBLY Note: If your rack is not equipped with Attach each upright to the base using (8) spotter stands, proceed to step 2. M10x35L bolts and (8) M10 washers. Do not tighten bolts. Place bases and spotter stands where the machine is to be used.
Page 5
ENGLISH ASSEMBLY Upright support and Weight Storage Chin bar: Using (4) M10x35L bolts, (4) Top: Using (16) M10x35L bolts and (16) M10 washers, (4) M12x105L bolts, (8) M10 washers, attach the upright support M12 washers and (4) M12 nuts, attach to the top of the uprights and top of the the chin bar between the top upright weight storage.
Need help?
Do you have a question about the MAGNUM MG-MR690-03 and is the answer not in the manual?
Questions and answers