Table of Contents
Advertisement
Powering the camera system
50
Inserting a battery in the handgrip
You must have a charged battery in the handgrip in order to use your camera system.
Before using the camera system for the first time, charge the batteries for 12 hours. After the initial charge,
charging the batteries takes just a few hours.
Note: If you are changing batteries, make sure that the camera is switched off before you remove the
battery so that you do not lose any of your settings.
1.
Open the case of the handgrip by squeezing the battery compartment release button and pulling the
battery compartment door downward.
The compartment drawer opens.
Advertisement
Table of Contents
