Leaf Wiview; Enabling Wireless Connection On The Imaging Module - Kodak AFi 10 User Manual

Leaf WiView

Using the Leaf WiView application, you can view and edit images on an HP iPAQ Pocket PC while another
person works with the camera system.
Leaf WiView is a wireless application that enables you to view and work with images on an iPAQ Pocket
PC as you shoot. You can perform all image functions on the iPAQ Pocket PC. Before you begin working
with the Leaf WiView application, you must first install it on the iPAQ Pocket PC. For instructions on
installing, see the Leaf WiView Installation Guide (731-00576E-EN).
When you are using the Leaf WiView application while the camera is still taking shots, every incoming
shot replaces whatever is displayed on the iPAQ Pocket PC. If the incoming shot interrupts your workflow,
your changes are not saved unless you actively saved them before the shot arrived.
Note: Avoid editing images or setting gray balance on the Leaf AFi camera system and iPAQ Pocket PC at
the same time.

Enabling wireless connection on the imaging module

Wireless on the Leaf AFi imaging module must be enabled to allow the camera to communicate with an
HP iPAQ Pocket PC.
This task is performed on the Leaf AFi imaging module, in Setup view.
Enabling wireless connection on the imaging module
For an up-to-date list
of compatible iPAQ
Pocket PCs, go to the
Leaf website.
149