Changing The Name Of The Imaging Module - Kodak AFi 10 User Manual

Leaf WiView: working with HP iPAQ Pocket PC
154
5. Tap the imaging module that you want to connect to, and tap choose.
6. Enter the PIN that you set up for the Leaf WiView.
7. Tap ok.
The iPAQ Pocket PC connects to the imaging module.
Note: After the first time you have established a connection between your Leaf AFi imaging module
and your iPAQ Pocket PC, the iPAQ connects to the camera system automatically. If your iPAQ does
not connect to the imaging module automatically, repeat steps 2-7 of this procedure.

Changing the name of the imaging module

Change the imaging module name that appears on the iPAQ Pocket PC.
This task is performed on the iPAQ Pocket PC, in Setup view.
1. Tap Wireless.